Construction Site Cleanup & Sweeping in McAllen, TX
and the Rio Grande Valley Region
Construction site cleaning across McAllen and the Rio Grande Valley has two problems to manage: dry wind that lifts dust and fines from a job site, and sudden downpours that move whatever remains. Moore Clean sweeps haul routes, gate approaches, and staging pavement for active builds and supplies dated records for the SWPPP binder on each visit, so the street at the entrance stays clean between inspections.
At a glance
Built for active job sites
General contractors working the Rio Grande Valley, from cold-storage and warehouse construction along I-69C near the Pharr bridge to retail pads on Expressway 83 and North 10th Street and residential phases out toward Edinburg and Mission, call on Moore Clean so that the street outside the gate is ready for an inspector at any time. Our crews schedule track-out, dust, and debris work around pours, deliveries, and overlapping trades, on day or night shifts, and adjust the frequency as the project moves through its phases.
Construction site cleaning across McAllen and the Valley is scheduled around two milestones. Pre-construction cleanup takes place ahead of mobilization, when the pad and access roads are cleared and the brush, demolition debris, and caliche dust on staging areas are swept and hauled off. Post-construction cleanup takes place ahead of turnover, when haul routes and curb lines are swept, nails and tie wire are removed from the pavement, dried mud and residue are washed from flatwork, and the public street at the entrance is cleaned in time for the owner walk-through.
The workload is not letting up. TxDOT’s Pharr District keeps widening stretches of I-2, I-69C and I-69E, the produce and logistics corridor around the bridges keeps adding warehouse pads, and the U.S. Census Bureau’s Building Permits Survey tracks steady residential permitting across the McAllen and Brownsville metros. Each of those is future pavement with track-out to control.
Our routes
Haul routes swept and track-out held at the gate
What’s included
What construction site cleanup covers on a Rio Grande Valley build
- Haul-route sweeping & track-out control
- Blown dust & fines along curb lines
- Gates & entrances cleared of sediment and caliche
- Nail, screw & metal debris pickup by magnet
- Pre-inspection sweeps & sweeps ahead of pours
- Paving & milling cleanup
- Service documentation that supports the SWPPP
- Final cleanup before turnover
Valley job sites sit on caliche base and sandy loam, and long dry periods turn that soil into a fine powder. We sweep it with dust-suppressed equipment, including the TYMCO DST-4, a dustless sweeper designed for material of that kind. Magnet bars work the haul routes as well and recover nails and tie wire before a subcontractor vehicle picks them up. A final pressure wash at turnover returns the flatwork to a finished condition.
This service covers the outside of the project, including construction sweeping, track-out control, and debris pickup along haul routes, pavement, and gate approaches. Interior post-construction janitorial cleaning is a separate trade, and we can suggest a provider if the project requires one.
Why it matters
What does SWPPP compliance require from cleanup in McAllen and the Rio Grande Valley region?
A Valley job site can sit dry and dusty for weeks and then take several inches of rain in an afternoon. Whatever is loose at the entrance when that happens is carried into the drainage ditches within the hour. The EPA NPDES construction stormwater program and the TCEQ construction general permit (TXR150000) require the operator to hold sediment on the site, and Valley cities operate under stormwater permits of their own, so the gate and the street outside it have to be clean before the storm arrives.
Regular sweeping is the preparation. Track-out is removed at the gate, haul routes are swept, and collected material is hauled off, and each visit is recorded with a date. A superintendent can give those records to a city inspector on request, and the ditches that carry runoff toward the Arroyo Colorado receive less dust and sediment from the project.
Construction Cleanup Power SweepingHaul routes and gate approaches are swept clear of dust, grit, and small debris on every visit.
Magnetic Nail PickupNails, screws, and tie wire missed by a broom pass are lifted with magnet bars.
Debris RemovalPiles are loaded, hauled, and recorded, and the next trade is not held up.
Power WashingWashing removes caked mud and dust film from pads and walkways, and the runoff is recovered.
Documentation
Dated sweep records for your SWPPP binder
Where we work
Construction site sweeping across McAllen and the Rio Grande Valley region
Routes cover active builds in McAllen, from the Convention Center district through the pads along Expressway 83 and 10th Street, north to Edinburg, west to Mission, south to Pharr and Hidalgo, east along I-2 through Weslaco to Harlingen and Brownsville, and up US-83 to Rio Grande City, spanning Hidalgo, Cameron, Willacy and Starr counties. One-time pre-inspection sweeps, weekly service on active phases, and full final cleanup are all standard offerings.
Moore Clean | McAllen & the Rio Grande Valley
McAllen, TX 78501 · (361) 600-8410 · 24/7 Service available
Get started
Get a construction cleanup quote for your site in McAllen and the Rio Grande Valley region
Send the site location, the current phase, and the project schedule, and we will return a cleanup plan for the Valley that includes SWPPP-support documentation.
Get More Information
Select a service and fill out form
"*" indicates required fields
Questions
Rio Grande Valley construction cleanup FAQ
Can you schedule around an active Valley job site?
Yes. Tell us when pours, deliveries, and inspections are set, and we sweep around them, early, late, or between phases. Longer projects run on a recurring cadence that changes with the site plan.
How do you handle dust and Valley wind?
Dry caliche and a steady southeast wind move fines back onto curb lines between visits, so many Valley sites sweep more often in the dry months. We use vacuum sweepers with dust suppression so the fines are collected, not scattered, and we can add a visit after a flash-flood rain or a tropical storm.
Is a magnet sweep part of every visit?
Yes. We run magnets with each construction sweep to pull nails, screws, and tie wire from gates, haul roads, and staging areas. That means fewer flats for your subs, and CPWR lists the same housekeeping in its housekeeping toolbox talk as a way to prevent puncture injuries.
How is each visit documented for the SWPPP?
Every visit is logged with the date, the areas swept, and what was hauled, ready for the SWPPP binder under the TXR150000 general permit. Valley cities operate under MS4 permits that expect sediment held at the source, and runoff from a gate ends up in a Hidalgo County Drainage District No. 1 ditch, so the log is written with that in mind.
Is this construction sweeping or post-construction cleaning?
Construction sweeping. We work the exterior of the site, including haul roads, gate approaches, curb lines, and the street out front, and we log it for the SWPPP file. Interior post-construction cleaning is a separate trade that we do not provide.
Parking Lot Sweeping · Street Sweeping · Pressure Washing · Airport Sweeping · Garage Sweeping
Porter Service · Window Cleaning · Graffiti Removal · Hauling Debris · Exterior Handyman · Bundled Services